قالب:Convert/doc

For currency conversion into US dollars, see Template:To USD.

Template {{convert}} calculates a measurement value (number × unit) into the same measurement by a different unit, and then presents the results, formatted. The complete list of unit symbols recognized by the template is here.

For example:

{{convert|2|km|mi}} → 2 كيلومترs (1.2 ميل) (km entered, converted into miles)

{{convert|7|mi|km}} → 7 ميلs (11 كـم) (mi entered, converted into km)

Numbers can be rounded, units can be abbreviated into symbols:

{{convert|2|km|mi|2|abbr=on}} → 2 كـم (1.24 ميل)

{{convert|7|mi|km|2|abbr=on}} → 7 ميل (11.27 كـم)

Value ranges can be entered using |to|... or |-|...:

{{convert|2|to|5|km|mi}} → 2 إلى 5 كيلومترs (1.2 إلى 3.1 ميل)

{{convert|2|-|5|km|mi}} → 2–5 كيلومترs (1.2–3.1 ميل)

Combined effect example:

{{convert|2|-|5|km|mi|2|abbr=on}} → 2–5 كـم (1.24–3.11 ميل)

{{convert|2|and|5|km|mi|sigfig=3|abbr=off}} →

See مساعدة:Convert for more detailed, technical information

Units to convert

See also: the summary at Complete list of units for {{Convert}} and the complete list at Module:Convert/documentation/conversion data

Enter units to convert from into:

• {{convert|1|lb|kg}} → 1 رطل (0.45 كـغ)

SI units generally accept prefixes, like "m" for milli (10⁻³), and "M" for mega (10⁶)

For "per" units, use "/" (slash): kg/ha (see § 'per' units: kg/ha and § Currency per unit: $/km)

For three-unit units, etc., see Category:Convert-like templates

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first quantity shows the unit name, the second shows the symbol (or abbreviation):

• {{convert|1|lb|kg}} → 1 رطل (0.45 كـغ)

Using |abbr=in shows the symbol for first (left-hand side) unit, and the name instead of the symbol for the second unit:

• {{convert|1|lb|kg|abbr=in}} → 1 رطل (0.45 كيلوغرامs)

To abbreviate both or neither:

• {{convert|1|lb|kg|abbr=on}} → 1 رطل (0.45 كـغ)
• {{convert|1|lb|kg|abbr=off}} → 1 رطل (0.45 كيلوغرامs)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is the same as {{convert}}, except that it has |abbr=on as the default behavior. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → 1 رطل (0.45 كـغ)

is equivalent to:

{{convert|1|lb|kg|abbr=on}} → 1 رطل (0.45 كـغ)

Adjective: a 10-mile distance

Use |adj=on to produce the adjectival (hyphenated) form:

• A {{convert|10|mi|km|adj=on}} distance → A 10-ميل (16 كـم) distance.

Default behavior, for comparison:

• {{convert|10|mi|km}} to go → 10 ميلs (16 كـم) to go.

|adj=on does not produce hyphens with unit symbols, as per :

• A {{convert|9|in|cm|adj=on|abbr=on}} nail → A 9 بوصة (23 سـم) nail.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

See Help:Convert § Rounding for a more mathematical description of the rounding options

By definition, 100 ft equals . In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	123 قدم (40 م)
{{convert|123|ft|m}}	123 قدم (37 م)	same output as with 0 (below)
{{convert|123|ft|m|0}}	123 قدم (37 م)
{{convert|123|ft|m|1}}	123 قدم (37.5 م)
{{convert|123|ft|m|2}}	123 قدم (37.49 م)	The more-exact value is 37.4904 m or so, which gets converted to 37 m if this parameter is not specified at all.
{{convert|500|ft|m|-1}}	500 قدم (150 م)
{{convert|500|ft|m}}	500 قدم (150 م)	same output as with -1 (above), because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
{{convert|500|ft|m|0}}	500 قدم (152 م)
{{convert|500|ft|m|1}}	500 قدم (152.4 م)
{{convert|500|ft|m|2}}	500 قدم (152.40 م)	exact value is 152.4 m
{{convert|500|ft|cm|-3}}	500 قدم (15,000 سـم)
{{convert|500|ft|cm}}	500 قدم (15,000 سـم)	same output as with -3 (above), because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
{{convert|500|ft|cm|0}}	500 قدم (15,240 سـم)

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 1⁄10 to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert|1200|ft|m|sigfig=4}} →
• {{convert|1200|ft|m|sigfig=3}} →
• {{convert|1200|ft|m|sigfig=2}} →
• {{convert|1200|ft|m|sigfig=1}} →

Default behavior, for comparison:

• {{convert|1200|ft|m}} → 1,200 قدم (370 م)

Setting |sigfig= to a value less than 1 is meaningless:

• {{convert|1200|ft|m|sigfig=0}} →

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert|10|m|ft}} → 10 مترs (33 قدم)
• {{convert|10|m|ft|round=5}} → 10 مترs (35 قدم)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert|10|m|ft}} → 10 مترs (33 قدم)
• {{convert|10|m|ft|round=25}} → 10 مترs (25 قدم)

Default behavior, for comparison:

• {{convert|10|m|ft|sigfig=4}} →

In a range, one can round each value individually to the default. Use |round=each:

• {{convert|10 x 200 x 3000|m|ft}} → 10 by 200 by 3,000 مترs (33 قدم × 656 قدم × 9,843 قدم)
• {{convert|10 x 200 x 3000|m|ft|round=each}} → 10 by 200 by 3,000 مترs (33 قدم × 660 قدم × 9,800 قدم)

Round to a multiple of a given fraction: 2+3⁄16 inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in 1⁄3).

• {{convert|5.56|cm|in|frac=16}} →
• {{convert|8|cm|in|frac=4}} →

The fraction is reduced when possible:

• {{convert|8|cm|in|frac=100}} →

Default behavior uses decimal notation:

• {{convert|5.56|cm|in}} → 5.56 سنتيمترs (2.19 بوصة)

Rounding temperatures: °C, °F and K

In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert|10,000|C|F K}} → 10,000 °م (18,000 °ف; 10,300 ك)
2. {{convert|10,000.1|C|F K}} → 10,000.1 °م (18,032.2 °ف; 10,273.2 ك)
3. {{convert|-272|C|F K}} → −272 °م (−457.60 °ف; 1.15 ك)
4. {{convert|-272|C}} → −272 °م (−457.60 °ف)
5. {{convert|100|C|F K}} → 100 °م (212 °ف; 373 ك)
6. {{convert|0|C|F K}} → 0 °م (32 °ف; 273 ك)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 تغير درجة مئويةs is a 0.18 تغير درجة فهرنهايتs, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} →

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10,000 °م (18,032 °ف)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Rounding input

There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by

</noinclude> or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.

To round the input to a specified number of digits after the decimal point, use one of the parameters:

• |adj=ri0
• |adj=ri1
• |adj=ri2
• |adj=ri3

Note that it is not possible to round above the decimal place (|adj=ri-1). Neither is there support for significant figures, multiples of 5, or any other output-rounding feature.

The default precision is computed based on the input, so an explicit output precision must usually be supplied:

• {{convert|4.14159|mi|km|adj=ri0}}

</noinclude> → 4 ميلs (6.66524 كـم) (precisions are mismatched)

• {{convert|4.14159|mi|km|0|adj=ri0}}

</noinclude> → 4 ميلs (7 كـم) Y

In this case, if the input were rounded before conversion, a different result would be obtained:

• {{convert|{{#expr:4.14159 round 0}}|mi|km|0}}

</noinclude> → 4 ميلs (6 كـم) (rounds intermediate calculation, giving a different result)

Into multiple units: 10 °م (50 °ف; 283 ك)

Separate the multiple output units by a space:

• {{convert|10|C|F K}} → 10 °م (50 °ف; 283 ك)
• {{convert|5|km|mi nmi}} → 5 كيلومترs (3.1 ميل; 2.7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see § In input and § In output.

Ranges of values

For a conversion of a difference, see § Units of difference.

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3–6 قدم (0.91–1.83 م)	Input can be hyphen (-) or en dash (–), output uses en dash
– – (en dash)	{{convert|3|–|6|ft}}	3–6 قدم (0.91–1.83 م)
and	{{convert|3|and|6|ft}}	3 و 6 قدم (0.91 و 1.83 م)
and(-)	{{convert|3|and(-)|6|ft}}	3 و 6 قدم (0.91–1.83 م)	|abbr=on abbreviates the first unit
and(-)|abbr=on	{{convert|3|and(-)|6|ft|abbr=on}}	3 و 6 قدم (0.91–1.83 م)
or	{{convert|3|or|6|ft}}	3 أو 6 قدم (0.91 أو 1.83 م)
to	{{convert|3|to|6|ft}}	3 إلى 6 قدم (0.91 إلى 1.83 م)
to(-)	{{convert|3|to(-)|6|ft}}	3 to 6 قدم (0.91–1.83 م)	|abbr=on abbreviates the first unit
to(-)|abbr=on	{{convert|3|to(-)|6|ft|abbr=on}}	3 to 6 قدم (0.91–1.83 م)
to about	{{convert|3|to about|6|ft}}	3 to about 6 قدم (0.91 to about 1.83 م)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 قدم (0.91 ± 1.83 م)
± ±	{{convert|3|±|6|ft}}	3 ± 6 قدم (0.91 ± 1.83 م)
+	{{convert|3|+|6|ft}}	3 + 6 قدم (0.91 + 1.83 م)
,	{{convert|3|,|6|ft}}	3, 6 قدم (0.91, 1.83 م)
, and	{{convert|3|, and|6|ft}}	3، و6 قدم (0.91، و1.83 م)
, or	{{convert|3|, or|6|ft}}	3، أو6 قدم (0.91، أو1.83 م)
by	{{convert|3|by|6|ft}}	3 by 6 قدم (0.91 by 1.83 م)
x	{{convert|3|x|6|ft}}	3 by 6 قدم (0.91 م × 1.83 م)	|abbr=on abbreviates and repeats the first unit
× ×	{{convert|3|×|6|ft}}	3 by 6 قدم (0.91 م × 1.83 م)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 قدم × 6 قدم (0.91 م × 1.83 م)
xx	|xx| is deprecated. Use |x| instead
*	|*| is deprecated. Use |x| instead

Multiple dimensions: 6 م × 12 م (20 قدم × 39 قدم)

Use by:

• {{convert|6|by|12|ft|m}} → 6 by 12 قدم (1.8 by 3.7 م)

Use ×, multiplication sign, or x, letter:

• {{convert|6|x|12|m|ft}} → 6 by 12 مترs (20 قدم × 39 قدم)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert|6|x|12|m|ft|abbr=on}} → 6 م × 12 م (20 قدم × 39 قدم)

Lists of values: 20, 40, or 60 miles

{{convert|20|,|40|, or|60|mi}} → 20, 40، أو60 ميلs (32, 64، أو97 كـم)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 قدم 3 بوصة ()

Default behavior, for comparison:

• {{convert|1|ft|3|in|mm}} → 1 قدم 3 بوصة (380 مـم)

However, converting metric units into feet and inches with |order=flip can produce the desired output:

• {{convert|380|x|1040|mm|ftin|order=flip}} → 1 قدم 3 بوصة by 3 قدم 5 بوصة (380 مـم × 1,040 مـم)

Words

Spelling of unit name: international metre or US meter?

Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 متر (3.3 قدم)—default

{{convert|1|m|ft|sp=us}} → 1 متر (3.3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert|10|mi|m|spell=in}} → ten ميلs (16,000 م)

To spell out both in and out values, use |spell=on:

• {{convert|10|mi|m|spell=on}} → ten ميلs (sixteen thousand مترs)

To make first letter a capital, use |spell=In, |spell=On

• {{convert|10|mi|m|spell=In}} → Ten ميلs (16,000 م)
• {{convert|10|mi|m|spell=On}} → Ten ميلs (sixteen thousand مترs)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

• {{convert|10|mi|m|spell=on|abbr=off|sp=us}} → ten ميلs (sixteen thousand مترs)

Inserted before units: 4 planted acres

• {{convert|4|acre||adj=pre|planted}} → 4 planted أكرs (1.6 ها)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert|4|acre||disp=preunit|planted }} → 4 planted أكرs (1.6 planted ها)
• {{convert|4|acre||disp=preunit|planted |reforested-}} → 4 planted أكرs (1.6 reforested-ها)

After adjective unit: A 10-قدم-long corridor

Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.

{{convert|10|ft|m|adj=mid|-long}} → 10-قدم-long (3.0 م)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → 1 متر (3 قدم 3 بوصة)
• {{convert|2|metre}} → 2 مترs (6 قدم 7 بوصة)
• {{convert|2|metre|abbr=on}} → 2 م (6 قدم 7 بوصة)

Exception

Entering the unit "foot" instead of "ft" forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → 100 قدم (30 مترs)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{convert|3+1/2|oz|g|spell=in}} → three and a half أونصةs (99 غ)

Any additional words needed for the fraction can also be added at the end of the template.

• {{convert|1/8|imppt|ml|spell=in|adj=pre|of an}} → one-eighth of an باينت إمبراطوري (71 مـل)

Wrapping and line breaking

See Help:Convert § Wrapping and line breaking

Spelling out "thousands", "millions", etc.

Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).

• {{convert|100|e6mi|e6km}} → 100 مليون ميلs (160×10^⁶ كـم)
• {{convert|120|e6acre}} → 120 مليون أكرs (490,000 كـم²)
• {{convert|120|e6acre|e3km2}} → 120 مليون أكرs (490×10^³ كـم²)

To display both input and output in scientific notation, use |abbr=on

• {{convert|100|e6mi|e6km|abbr=on}} → 100×10^⁶ ميل (160×10^⁶ كـم)

To spell out "thousands", "millions", etc., |abbr=unit abbreviates the unit; |abbr=off displays both full unit names.

• {{convert|100|e6mi|e6km|abbr=unit}} → 100 مليون ميل (160 مليون كـم)
• {{convert|100|e6mi|e6km|abbr=off}} → 100 مليون ميلs (160 مليون كيلومترs)

Numbers

Using an SI prefix: gigametre (Gm), or micrometre (μm)

Metric prefixes
Text Symbol Factor yotta Y 1024 zetta Z 1021 exa E 1018 peta P 1015 tera T 1012 giga G 109 mega M 106 kilo k 103 hecto h 102 deca da 101 (none) (none)  1 deci d 10−1 centi c 10−2 milli m 10−3 micro μ 10−6 nano n 10−9 pico p 10−12 femto f 10−15 atto a 10−18 zepto z 10−21 yocto y 10−24

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigametre. These are plain multiplication factors.

To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:

• 12 جـم (1.2×10¹⁰ م)
• 12 مكـم (1.2×10⁻⁵ م)

The prefix can be added before the SI unit (here: unit m for metre):

• {{convert|12|Gm|mi|abbr=on}} → 12 جـم (7,500,000 ميل)
• Mm: 12 مجم (7,500 ميل)
• km: 12 كـم (39,000 قدم)
• mm: 12 مـم (0.47 بوصة)
• μm: 12 مكـم (0.012 مـم)
• um: 12 مكـم (0.012 مـم) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → 12,000 ميل (19 مجم)
• {{convert|12|in|μm|abbr=on}} → 12 بوصة (300,000 مكـم)

As an exception, the non-SI unit "inch" can have the "μ" prefix too:

• {{convert|12|μm|μin|abbr=on}} → 12 مكـم (470 مي.بوصة)

Further information: Help:Convert units § SI prefixes

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering notation can be entered as a "prefix" to the unit:

• {{convert|70|e6m}} → 70×10^⁶ م (230,000,000 قدم)

The same is possible for the output unit:

• {{convert|23,000,000|ft|e6m}} → 23,000,000 قدم (7.0×10^⁶ م)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

• e3 (thousand),
• e6 (million),
• e9 (billion),
• e12 (trillion),
• e15 (quadrillion).

Scientific notation: 1.23 × 10⁻¹⁴

In scientific notation, a number is written like 1.23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → 12.3×10⁻¹⁵ جو (1.23×10⁻¹⁴ جو)
• {{convert|0.00000005|atm|atm|abbr=on}} → 0.00000005 جو (5.0×10⁻⁸ جو)

Input with fractions:

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert|1/2|in|mm|1}} →
• {{convert|1⁄2|in|mm|1}} →

With positive mixed numbers (a positive integer and a fraction), use a + sign

• {{convert|2+1⁄2|in|mm|1}} →

With negative mixed numbers, use a hyphen - and repeat it:

• {{convert|-2-1⁄2|in|mm|1}} →

Note that the following cases are not interpreted as mixed numbers:

• {{convert|2-1⁄2|in|mm|1}} → . This is interpreted as a range from 2 inches to 1⁄2 inch.
• {{convert|-2+1⁄2|in|mm|1}} → This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.
• {{convert|2+½|in|mm|1}} → Fractions consisting of a single Unicode character are not allowed either.

Horizontal fraction bar: 1/2 inch

Using a double slash (//) provides a horizontal fraction bar for the original (input) unit:

• {{convert|1//2|in|mm|1}} →
• {{convert|6+3//8|in|mm|1}} →

Using a negative value for |frac= provides a horizontal fraction bar for the converted (output) unit:

• {{convert|12.7|mm|frac=-2}} →
• {{convert|161.9|mm|frac=-8}} →

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert|1234567|m|ft}} → 1,234,567 مترs (4,050,417 قدم)
• {{convert|1,234,567|m|ft}} → 1,234,567 مترs (4,050,417 قدم)

Set |comma=off to remove the separator from the output:

• {{convert|1234567|m|ft|comma=off}} → 1234567 مترs (4050417 قدم)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert|1234567|m|ft|comma=gaps}} → 1234567 مترs (4050417 قدم)

Default behavior, for comparison:

• {{convert|1234567|m|ft}} → 1,234,567 مترs (4,050,417 قدم)

Setting |comma=5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft|comma=5}} → 1234 مترs (4049 قدم)
• {{convert|1234567|m|ft|comma=5}} → 1,234,567 مترs (4,050,417 قدم)

Default behavior, for comparison:

• {{convert|1234|m|ft}} → 1,234 مترs (4,049 قدم)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, br(), x|…:

• {{convert|10|m|ft|disp=sqbr}} → 10 مترs [33 قدم]
• {{convert|10|m|ft|disp=comma}} → 10 مترs, 33 قدم
• {{convert|10|m|ft|disp=or}} → 10 مترs أو 33 قدم

Default behavior, for comparison:

• {{convert|10|m|ft}} → 10 مترs (33 قدم)

Setting |disp=br will force a new line (<br/>)

• {{convert|10|m|ft|disp=br}} → 10 مترs
  33 قدم

Also |disp=br() will force a new line, and keep the brackets (useful in tables):

• {{convert|10|m|ft|disp=br()}} → 10 مترs
  (33 قدم)

Setting |disp=x|… allows any text as separator:

• {{convert|10|m|ft|disp=x|_MyText_}} → 10 مترs_MyText_33 قدم (To display spaces, use  )

Flipping (reordering) the two measurements:

Setting |order=flip will flip (swap) the two measurements:

• {{convert|1|mi|m|order=flip}} →

Default behavior, for comparison:

• {{convert|1|mi|m}} →

When converting to multiple units, the effect is:

• {{convert|10|km|mi nmi|order=flip}} →
• {{convert|10|km|nmi mi|order=flip}} →

Fixed ordering of output units: 212 °ف (100 °م; 373 ك)

Setting |order=out shows the output-units as ordered; the input unit is skipped:

• {{convert|100|C|F C K|abbr=on|order=out}} → 212 °ف (100 °م; 373 ك)
• {{convert|200|PS|kW hp|0|abbr=on|order=out}} → 147 كـو (197 حصان)

شوف كمان: § Displaying parts of the output

Displaying parts of the result: 2 (1.5)

It is possible to display only parts of the conversion result: The following examples show how to display only a part of the result.

Note: in Convert, abbr is synonym for unit symbol

Convert	Returns	Components
{{convert|2|cuyd|m3}}	2 يارد مكعبs (1.5 م3)	all (default conversion)
{{convert|2|cuyd|m3|abbr=on}}	2 ياردة3 (1.5 م3)	all (default conversion, abbr)
{{convert|2|cuyd|m3|abbr=values}}	2 (1.5)	numbers only
{{convert|2|cuyd|m3|disp=unit}}	يارد مكعبs	input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}}	يارد-مكعب	input unit, adjectival (hyphenated)
{{convert|2|cuyd|m3|disp=unit|adj=on|abbr=on}}	ياردة3	input unit, adjectival (abbr so not hyphenated)
{{convert|2|cuyd|cuyd|disp=unit}}	2.0 ياردة3	input unit abbr (unit repeated, workaround)
{{convert|2|cuyd|m3|disp=out}}	1.5 م3	output value, symbols
{{convert|2|cuyd|m3|disp=out|abbr=off}} || 1.5 متر مكعبs || output value, names
{{convert|2|cuyd|m3|disp=out|adj=on}} || 1.5-متر-مكعب || output, adjective
{{convert|2|cuyd|m3|disp=number}} || 1.5 || output number
{{convert|2|cuyd|m3|disp=unit2}} || م3 || output unit (abbr by default)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} || متر مكعبs || output unit (name)
{{convert|2|cuyd|m3|disp=unit2|abbr=on}} || م3 || output unit (abbr)

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert|2|kPa|psi|abbr=~}} → 2 كيلوباسكالs [كـبا] (0.29 psi)
• A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2-كيلوباسكال [كـبا] (0.29 psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
100 كيلومترs 62 ميلs	100 كيلومترs (62 ميلs)

Table columns

Using {convert} in a table cell, with |disp=table splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr= parameter. Multiple-unit outputs, like ftin, always output their units to the table.

{{convert|10|m|ft|disp=table}} →

style="text-align:right;"|10 |style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} →

style="text-align:center;"|20 |style="text-align:center;"|66

The units are added as a column header:

	kilograms	pounds	stone and pounds
|disp=table	10	22	1 ستون 8 رطل
|disp=table and |abbr=on	20 كـغ	44 رطل	3 ستون 2 رطل
|disp=table and |abbr=off	30 كيلوغرامs	66 رطلs	4 ستون 10 رطلs
|disp=tablecen	40	88	6 ستون 4 رطل
|disp=<other> (default)	50 كيلوغرامs (110 رطل; 7 ستون 12 رطل)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)

showing: 10 مترs (33 قدم).

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	m	ft
A	15.75 م
B	15.5 م	15.5	51
C	16 م	16.0	52.5
D	16 م	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

The conversion factors and physical constants are sourced here.

All units

Units are case-sensitive: use kW, not KW or kw

The table below lists units supported by {{convert}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.

{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:

• {{convert|100|kg|lb}}

</noinclude> → 100 كيلوغرامs (220 رطل)

• {{convert|100|lb|kg}}

</noinclude> → 100 رطلs (45 كـغ)

The unit-codes should be treated as case-sensitive:

• {{convert|100|Mm|mm}}

</noinclude> → 100 ميجامترs (1.0×10¹¹ مـم)

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.

• {{convert|55|nmi|km mi}}

</noinclude> → 55 ميل بحريs (102 كـم; 63 ميل)

• {{convert|1|oz|ozt g gr}}

</noinclude> → 1 أونصة (0.91 ozt; 28 غ; 440 gr)

Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F (F). Either may be entered for Fahrenheit (but not a lower-case f).

Abridged list of supported units
التفسير
النظام	الوحدة	الرمز (البديل)	اختصار	الملاحظات	معامل التحويل	المجموعات
النظام اللى تنتمى ليه الوحدة	الوحدات مذكورة بالاسم	الوحدات اللى ممكن الوصول ليها عند استخدام القالب	الاختصارات اللى يظهرها القالب	الملاحظات اللى تتصل بالوحدات المستخدمة فى القوالب	معاملات التحويل اللى يتم استخدامها فى نماذج التحويل	تستخدم فى التحويلات المتعددة
AREA (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	كيلومتر مربع	km2		كـم2	US spelling: square kilometer	1.0 كـم2 (0.39 ميل2)	km2 sqmi
	متر مربع	m2		م2	US spelling: square meter	1.0 م2 (11 قدم2)	m2 sqft
	سنتيمتر مربع	cm2		سـم2	US spelling: square centimeter	1.0 سـم2 (0.16 بوصة2)	cm2 sqin
	مليمتر مربع	mm2		مـم2	US spelling: square millimeter	1.0 مـم2 (0.0016 بوصة2)	mm2 sqin
non-SI metric	هكتار	ha		ها		1.0 ها (2.5 أكرs)
Imperial & US customary	ميل مربع	sqmi		ميل2		1.0 ميل2 (2.6 كـم2)	sqmi km2
	أكر	acre		(none)		1.0 أكر (0.40 ها)
	ياردة مربعة	sqyd		ياردة2		1.0 ياردة2 (0.84 م2)
	قدم مربع	sqft (sqfoot)		قدم2	The sqfoot code will produce square foot as the plural form.	1.0 قدم2 (0.093 م2)	sqft m2 (sqfoot m2)
	بوصة مربعة	sqin		بوصة2		1.0 بوصة2 (6.5 سـم2)	sqin cm2
Other	ميل بحري مربع	sqnmi		sq nmi		1.0 sq nmi (3.4 كـم2; 1.3 ميل2)
	دونم	dunam		(none)	For alternative spellings and definitions see the full list	1.0 دونم (0.0010 كـم2; 0.00039 ميل2)
	توسبو	tsubo		(none)		1.0 توسبو (3.3 م2)
DENSITY
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
Metric	كيلوغرام لكل متر مكعب	kg/m3		كجم/م3		1.0 كجم/م3 (1.7 lb/cu yd)	kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd)
	غرام per متر مكعب	g/m3		غ/م3		1.0 غ/م3 (0.0017 lb/cu yd)	g/m3 kg/m3 g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial & US customary	رطل لكل قدم مكعب	lb/ft3		lb/cu ft		1.0 lb/cu ft (0.016 غ/سـم3)	lb/ft3 kg/m3 (lb/cu ft g/m3) lb/ft3 g/m3 (lb/cu ft g/m3)
	رطل لكل ياردة مربعة	lb/yd3		lb/cu yd		1.0 lb/cu yd (0.59 كجم/م3)	lb/yd3 kg/m3 (lb/cuyd kg/m3) lb/yd3 g/m3 (lb/cuyd g/m3)
ENERGY (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	جيجاجول	GJ		جـجول		1.0 جـجول (280 ك.و.سا)
	ميجاجول	MJ		مججول		1.0 مججول (0.28 ك.و.سا)
	كيلوجول	kJ		كـجول		1.0 كـجول (240 سع)
	هكتوجول	hJ		هـجول		1.0 هـجول (24 سع)
	ديكاجول	daJ		داجول		1.0 داجول (2.4 سع)
	جول	J		(none)		1.0 جول (0.24 سع)
	ديسيجول	dJ		دجول		1.0 دجول (0.024 سع)
	سنتيجول	cJ		سـجول		1.0 سـجول (0.0024 سع)
	مليجول	mJ		مـجول		1.0 مـجول (0.00024 سع)
	ميكروجول	μJ (uJ)		مكـجول		1.0 مكـجول (2.4×10−7 سع)
	نانوجول	nJ		نـجول		1.0 نـجول (2.4×10−10 سع)
cgs	ميجا إرج	Merg		مج.إرج		1.0 مج.إرج (0.10 جول)
	كيلو أرج	kerg		ك.أرج		1.0 ك.أرج (0.10 مـجول)
	إرج	erg		(none)		1.0 إرج (0.10 مكـجول)
Watt-hour multiples	تيرا وات في الساعة	TWh		تـ.و·س		1.0 تـ.و·س (3.6 بتـجول)
		TW.h		تـ.و·س
	جيجاوات في الساعة	GWh		جـ.و.سا		1.0 جـ.و.سا (3.6 تـجول)
		GW.h		جـ.و·سا
	ميجا وات في الساعة	MWh		مج.و·س		1.0 مج.و·س (3.6 جـجول)
		MW.h		مج.و·س
	كيلوواط-ساعة	kWh		ك.و.سا		1.0 ك.و.سا (3.6 مججول)
		kW.h		ك.و.سا
	وات في الساعة	Wh		و·س		1.0 و·س (3.6 كـجول)
		W.h		و·س
Electron- volt multiples
	جيجا إلكترون فولت	GeV		جـ.إف		1.0 جـ.إف (0.16 نـجول)
	ميجا إلكترون فولت	MeV		مج.إف		1.0 مج.إف (0.16 بـجول)
	كيلو إلكترون فولت	keV		ك.إف		1.0 ك.إف (0.16 فـجول)
	إلكترون فولت	eV		إف		1.0 إف (0.16 آجول)
	ملي إلكترون فولت	meV		مـ.إف		1.0 مـ.إف (0.16 زبـجول)
Calorie multiples	سعرة	Cal		سع	The thermo-chemical calorie is the default definition. For others, see the full list.	1.0 سع (4.2 كـجول)
	ميجا سعرة	Mcal		مج.سعرة
	كيلو سعرة	kcal		ك.سعرة
	سعرة	cal		سع
	ملي سعرة	mcal		مـ.سعرة
pound/ ounce-foot/ inch-hour-minute-second	ft·pdl	ftpdl		(none)		1.0 ft·pdl (0.042 جول)
	قدم-رطل قوة	ftlbf		قدم·رطلق		1.0 قدم·رطلق (1.4 جول)
		ftlb-f		قدم·رطلق
	بوصة-رطل قوة	inlbf		بوصة.رطلق		1.0 بوصة.رطلق (110 مـجول)
		inlb-f		بوصة.رطلق
	بوصة-أوقية force	inozf		بوصة·أوقية.ق		1.0 بوصة·أوقية.ق (7.1 مـجول)
		inoz-f		بوصة·أوقيةق
	حصان في الساعة	hph		حصان·سا		1.0 حصان·سا (0.75 ك.و.سا)
British thermal unit	وحدة حرارية بريطانية	Btu		و.ح.ب.	The International Steam Table British thermal unit is used. For others, see the full list.	1.0 و.ح.ب. (1.1 كـجول)
		BTU		و.ح.ب.
TNT-based units	جيجاطن من تي أن تي	GtTNT		(none)		1.0 جيجاطن من تي أن تي (4.2 يـجول)
	جيجاطن من تي أن تي	GtonTNT		(none)
	ميجا طن من تي أن تي	MtTNT		(none)		1.0 ميجا طن من تي أن تي (4.2 بتـجول)
	ميجا طن من تي أن تي	MtonTNT		مج.طن تي إن تي
	كيلوطن من تي أن تي	ktTNT		(none)		1.0 كيلوطن من تي أن تي (4.2 تـجول)
	كيلوطن من تي أن تي	ktonTNT		ك.طن.تي أن تي
	طن من تي أن تي	tTNT		(none)		1.0 طن من تي أن تي (4.2 جـجول)
	طن من تي أن تي	tonTNT		(none)
Other
	إلكترون فولت.هارتري	Eh		إفه		1.0 إفه (27 إف)
	Ry	Ry		(none)		1.0 Ry (14 إف)
	طن من مكافئ نفطي	toe		toe		1.0 toe (42 جـجول)
	برميل من مكافئ نفطي	BOE		BOE		1.0 BOE (6.1 جـجول)
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)			Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	1.0 قدم مكعب من natural gas (1.1 مججول)
	لتر-جو	latm		ل·جو		1.0 ل·جو (100 جول)
		Latm		ل·جو
	imp gal·atm	impgalatm		(none)		1.0 imp gal·atm (460 جول)
	جالون أمريكي-جو	USgalatm (usgalatm)		غالون أمريكي·جو		1.0 غالون أمريكي·جو (380 جول)
		U.S.galatm (usgalatm)		U.S. gal·atm
FORCE (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	جيجانيوتن	GN		جـن	Triple combinations are also possible. See the full list.	1.0 جـن (220,000,000 رطلق)	GN LT-f GN LTf GN ST-f GN STf
	ميجانيوتن	MN		مجن	Triple combinations are also possible. See the full list.	1.0 مجن (220,000 رطلق)	MN LT-f MN LTf MN ST-f MN STf
	كيلونيوتن	kN		كـن	Triple combinations are also possible. See the full list.	1.0 كـن (220 رطلق)	kN LT-f kN LTf kN ST-f kN STf
	نيوتن	N		ن		1.0 ن (0.22 رطلق)	N lb-f N lbf N oz-f N ozf
	ملينيوتن	mN		مـن		1.0 مـن (0.0036 أوقيةق)	mN oz-f mN ozf mN gr-f mN grf
	ميكرونيوتن	μN (uN)		مكـن		1.0 مكـن (0.0016 جرق)	μN gr-f μN grf
	نانونيوتن	nN		نـن		1.0 نـن (1.6×10−6 جرق)	nN gr-f nN grf
cgs	ميجا داين	Mdyn		مج.داين		1.0 مج.داين (2.2 رطلق)
	كيلو داين	kdyn		كـ.د		1.0 كـ.د (0.036 أوقيةق)
	داين	dyn (dyne)		(none)		1.0 داين (0.016 جرق)
	ميلي داين	mdyn		مـ.داين		1.0 مـ.داين (1.6×10−5 جرق)
Metric gravitational units	طنق	t-f		(none)		1.0 طنق (9.8 كـن; 0.98 LTق; 1.1 STق)
		tf		طنق
	كيلو غرام ثقلي	kg-f		كجمق		1.0 كجمق (9.8 ن; 2.2 رطلق)
		kgf		كجمق
	غرام ثقلي	g-f		غق		1.0 غق (9.8 مـن; 0.035 أوقيةق)
		gf		gf
	ميلي غرام ثقلي	mg-f		مجق		1.0 مجق (9.8 مكـن; 0.015 جرق)
		mgf		مـغ.ق
Avoirdupois-based units	باوندال	pdl		pdl		1.0 pdl (0.14 ن)
	طن كبير ثقلي	LT-f		LTق		1.0 LTق (10.0 كـن)	LT-f ST-f
		LTf		طن كبير ثقلي			LTf STf
	طن صغير ثقلي	ST-f		STق		1.0 STق (8.9 كـن)	ST-f LT-f
		STf		طن صغير ثقلي			STf LTf
	رطلق	lb-f		(none)		1.0 رطلق (4.4 ن)
		lbf		رطلق
	جرق	gr-f		(none)		1.0 جرق (640 مكـن)
		grf		جرق
LENGTH (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	ميجامتر	Mm		مجم	US spelling: megameter	1.0 مجم (620 ميل)
	كيلومتر	km		كـم	US spelling: kilometer	1.0 كـم (0.62 ميل)	km mi
	متر	m		م	US spelling: meter	1.0 م (3 قدم 3 بوصة)	m ft m ftin
	سنتيمتر	cm		سـم	US spelling: centimeter	1.0 سـم (0.39 بوصة)	cm in
	مليمتر	mm		مـم	US spelling: millimeter	1.0 مـم (0.039 بوصة)	mm in
	ميكرومتر	μm (um)		مكـم	US spelling: micrometer	1.0 مكـم (3.9×10−5 بوصة)
	نانومتر	nm		نـم	US spelling: nanometer	1.0 نـم (3.9×10−8 بوصة)
non-SI metric	أنغستروم	Å (angstrom)		أنغ		1.0 أنغ (3.9×10−9 بوصة)
Imperial & US customary	ميل	mi		(none)		1.0 ميل (1.6 كـم)	mi km
	فرلنغ	furlong		(none)		1.0 فرلنغ (660 قدم; 200 م)
	سلسلة	chain		(none)		1.0 سلسلة (66 قدم; 20 م)
	rod	rd		rd	For other names of this unit see the full list.	1.0 rd (17 قدم; 5.0 م)
	قامة	fathom		(none)	fathom ≡ 6 ft	1.0 قامة (6.0 قدم; 1.8 م)
	يارد	yd		(none)	assumes the international definition	1.0 يارد (0.91 م)
	قدم	ft (foot)		(none)	The foot code will produce foot as the plural form.Use of ′ and ″ symbols violates MOSNUM so is not provided.	1.0 قدم (0.30 م)	ftin (feet and inches) ft m (foot m)
	بوصة	in		(none)	Use of ′ and ″ symbols violates MOSNUM so is not provided.	1.0 بوصة (25 مـم)	in cm in mm
Other	ميل بحري	nmi		nmi	the international standard nautical mile For other nautical miles see the full list.	1.0 nmi (1.9 كـم; 1.2 ميل)
	فرسخ نجمي	pc		فخ		1.0 فخ (3.3 ly)
	سنة ضوئية	ly		ly		1.0 ly (63,000 AU)
	وحدة فلكية	AU		AU		1.0 AU (150,000,000 كـم; 93,000,000 ميل)
MASS (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	كيلوغرام	kg		كـغ	Triple combinations are also possible. See the full list.	1.0 كـغ (2.2 رطل)	kg lb kg st
	غرام	g		غ		1.0 غ (0.035 أونصة)	g oz
	مليغرام	mg		مـغ		1.0 مـغ (0.015 gr)	mg gr
	ميكروغرام	μg (ug)		مكـغ		1.0 مكـغ (1.5×10−5 gr)
non-SI metric	طن	t		t	Triple combinations are also possible. See the full list.	1.0 t (0.98 طن كبيرs; 1.1 طن صغيرs)	t LT t ST
	طن متري	MT		طن			MT LT MT ST
Avoirdupois	طن كبير	LT		(none)	2,240 lb used mostly in the British Commonwealth. Triple combinations are also possible. See the full list.	1.0 طن كبير (1.0 t)	LT t LT MT LT ST
		long ton		طن كبير
	طن صغير	ST		(none)	2,000 lb used mostly in the US. Triple combinations are also possible. See the full list.	1.0 طن صغير (0.91 t)	ST t ST MT ST LT
		short ton		طن صغير
	ستون	st		(none)	14 lb used mostly in the British Commonwealth except Canada. Triple combinations are also possible. See the full list.	1.0 ستون (14 رطل; 6.4 كـغ)	st kg st lb
	رطل	lb		(none)	Triple combinations are also possible. See the full list.	1.0 رطل (0.45 كـغ)	lb kg lb st
	أونصة	oz		(none)		1.0 أونصة (28 غ)	oz g
	drachm	drachm		(none)		1.0 drachm (1.8 غ)
	drachm	dram		(none)
	grain	gr		gr	equivalent to the troy grain	1.0 gr (0.065 غ)
Troy	أوقية ترويسية	ozt		ozt		1.0 ozt (1.1 أونصة; 31 غ)
other	قيراط	carat		(none)		1.0 قيراط (0.20 غ)
SPEED (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	متر في الثانية	m/s		م/ث	US spelling: meter per second	1.0 م/ث (3.3 قدم/ث)	m/s ft/s (m/s foot/s)
non-SI metric	كيلومتر في الساعة	km/h		كم/س	US spelling: kilometer per hour	1.0 كم/س (0.62 ميل/س)	km/h mph
Imperial & US customary	ميل في الساعة	mph		ميل/س		1.0 ميل/س (1.6 كم/س)	mph km/h mph kn
	قدم في الثانية	ft/s (foot/s)		قدم/ث	The foot/s code will produce foot per second as the plural form.	1.0 قدم/ث (0.30 م/ث)	ft/s m/s
Maritime units	عقدة	kn (knot)		(none)		1.0 عقدة (1.9 كم/س; 1.2 ميل/س)	kn mph
TEMPERATURE (Full list)
system	unit	unit- code		symbol	notes	sample default conversion	combination output units
SI	ك	K		ك	Triple combinations are also possible. See the full list.	1.0 ك (−272.15 °م; −457.87 °ف)	K °C (K C) K °R (K R) K °F (K F)
	°م	°C (C)		°م		°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary
	°ر	°R (R)		°ر		°R K (R K) °R °C (R C) °R °F (R F)
°ف	°F (F)		°ف	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change			Used for temperature intervals instead of actual temperatures Example:  {{convert|5|C-change|0}} warmer Result: 5 °م (9 °ف) warmer
	Fahrenheit change	F-change			Used for temperature intervals instead of actual temperatures Example:  {{convert|10|F-change|0}} colder Result: 10 °ف (6 °م) colder
TORQUE (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
Industrial
SI	نيوتن لكل متر	Nm		ن·م	Triple combinations are also possible. See the full list.	1.0 ن·م (0.74 رطلق·قدم)	Nm kg.m Nm lb.ft
Non-SI metric
كيلو غرام·متر	kg.m		كجم·م	kg.m Nm kg.m lb.ft
Imperial & US customary
رطل قوة-قدم	lb.ft		قدم·رطل	lb.ft Nm lb.ft kg-m
Scientific
SI	نيوتن لكل متر	N.m		ن·م	Triple combinations are also possible. See the full list.	1.0 ن·م (0.74 رطلق·قدم)	N.m kgf.m N.m lbf.ft
Non-SI metric
كيلو غرام ثقلي·متر	kgf.m		كجمق·م	kgf.m N.m kgf.m lbf.ft
Imperial & US customary
رطل قوة-قدم	lbf.ft		رطلق·قدم	lbf.ft N.m lbf.ft kgf.m
VOLUME (Full list)
system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	متر مكعب	m3		م3	US spelling: cubic meter one kilolitre	1.0 م3 (35 قدم3)
	سنتيمتر مكعب	cm3		سـم3	US spelling: cubic centimeter one millilitre	1.0 سـم3 (0.061 بوصة3)
		cc		سم3
	مليمتر مكعب	mm3		مـم3	US spelling: cubic millimeter	1.0 مـم3 (6.1×10−5 بوصة3)
non-SI metric	كيلولتر	kl		كـل	US spelling: kiloliter one cubic metre	1.0 كـل (35 قدم3)
		kL		كـل
	لتر	l		ل	US spelling: liter one cubic decimetre Triple combinations are also possible. See the full list.	1.0 ل (0.22 غالون إمب; 0.26 غال-أمريكي)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L		ل			L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	سنتيلتر	cl		سـل	US spelling: centiliter	1.0 سـل (0.35 imp fl oz; 0.34 US fl oz)
		cL		سـل
	مليلتر	ml		مـل	US spelling: milliliter one cubic centimetre	1.0 مـل (0.035 imp fl oz; 0.034 US fl oz)	ml impoz ml USoz ml U.S.oz
		mL		مـل			mL impoz mL USoz mL U.S.oz
Imperial & US customary	يارد مكعب	cuyd		ياردة3		1.0 ياردة3 (0.76 م3)
	قدم مكعب	cuft (cufoot)		قدم3	The cufoot code will produce cubic foot as the plural form.	1.0 قدم3 (0.028 م3)
	بوصة مكعبة	cuin		بوصة3		1.0 بوصة3 (16 سـم3)
Imperial	برميل إمبراطوري	impbbl		برميل إمب	36 imp gal	1.0 برميل إمب (160 ل; 36 غالون إمب; 43 غال-أمريكي)
	بوشل إمبراطوري	impbsh		بوشل إمب	8 imp gal
		impbu		بوشل إمب
	جالون إمبراطوري	impgal		غالون إمب	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Triple combinations are also possible. See the full list.	1.0 غالون إمب (4.5 ل; 1.2 غال-أمريكي)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imperial كوارت إمبراطوري	impqt		كوارت إمب	1/4 imp gal or 40 imp fl oz	1.0 imp كوارت إمب (1,100 مـل; 38 US fl oz)
	باينت إمبراطوري	imppt		باينت إمب	1/8 imp gal or 20 imp fl oz	1.0 باينت إمب (0.57 ل)
	أونصة سائلة	impoz (impfloz)		imp fl oz	1/160 imp gal	1.0 imp fl oz (28 مـل; 0.96 US fl oz)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	برميل أمريكي	USbbl		(none)	31½ US gal used for liquids except for oil and beer (see the full list)	1.0 برميل أمريكي (120 ل; 32 غال-أمريكي; 26 غالون إمب)
		U.S.bbl		U.S. bbl
	برميل	oilbbl		(none)	42 US gal	1.0 برميل (0.16 م3)
	برميل بيرة أمريكي	USbeerbbl (usbeerbbl)		برميل أمريكي		1.0 برميل أمريكي (120 ل; 31 غال-أمريكي; 26 غالون إمب)
		U.S.beerbbl (usbeerbbl)		U.S. bbl
	غالون أمريكي	USgal		غال-أمريكي	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Triple combinations are also possible. See the full list.	1.0 غال-أمريكي (3.8 ل; 0.83 غالون إمب)	USgal l USgal L USgal impgal
		U.S.gal		U.S. gal			USgal l USgal L USgal impgal
	US كوارت أمريكي	USqt		(none)	1/4 US gal or 32 US fl oz	1.0 US كوارت أمريكي (950 مـل)
		U.S.qt		U.S. qt
	باينت أمريكي	USpt		(none)	1/8 US gal or 16 US fl oz	1.0 باينت أمريكي (0.47 ل; 0.83 باينت إمب)
		U.S.pt		U.S. pt
	أوصنة أمريكية سائلة	USoz (USfloz)		US fl oz	1/128 US gal	1.0 US fl oz (30 مـل)	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)		U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry bbl	USdrybbl		(none)	105/32 US bsh	1.0 US dry bbl (0.12 م3)
		U.S.drybbl		U.S. dry bbl
	بوشل أمريكي	USbsh		(none)	2150.42 cubic inches by definition
		U.S.bsh		U.S. bsh
	بوشل أمريكي	USbu		(none)	2150.42 cubic inches by definition
		U.S.bu		U.S. bu
	US dry gal	USdrygal		(none)	1/8 US bsh Triple combinations are also possible. See the full list.		USdrygal l USdrygal L USdrygal impgal
		U.S.drygal		U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	كوارت أمريكي جاف	USdryqt		US dry qt	1/32 US bsh	1.0 US dry qt (1,100 مـل)
		U.S.dryqt		U.S. dry qt
	باينت أمريكي جاف	USdrypt		US dry pt	1/32 US bsh	1.0 US dry pt (550 مـل)
		U.S.drypt		U.S. dry pt
PRESSURE
	unit	unit- code		symbol or abbrev.		sample default conversion
	جيجاباسكال	GPa		جـبا		1.0 جـبا (150,000 psi)
	ميجاباسكال	MPa		مجبا		1.0 مجبا (150 psi)
	كيلوباسكال	kPa		كـبا		1.0 كـبا (0.15 psi)
	هكتوباسكال	hPa		هـبا		1.0 هـبا (0.015 psi)
	باسكال	Pa		با		1.0 با (0.00015 psi)
	مليباسكال	mPa		مـبا		1.0 مـبا (1.5×10−7 psi)
	ميليبار	mbar		مـم.بار		1.0 مـم.بار (1.0 هـبا)
		mb		مـم.بار
	ديسي بار	dbar		د.بار		1.0 د.بار (10 كـبا)
	بار	bar		(none)		1.0 بار (100 كـبا)
	كيلوباري	kBa		ك.بار		1.0 ك.بار (1.0 هـبا)
	ميكروبار	Ba		مي.بار		1.0 مي.بار (0.10 با)
	جو	atm		(none)		1.0 جو (100 كـبا)
	تور	Torr		(none)		1.0 تور (0.13 كـبا)
	ملليمتر من الزئبق	mmHg		مـم.زئبق		1.0 مـم.زئبق (0.13 كـبا)
	بوصة زئبقية	inHg		inHg		1.0 inHg (3.4 كـبا)
	رطل لكل بوصة مربعة	psi		psi		1.0 psi (6.9 كـبا)
FUEL EFFICIENCY
	unit	unit- code			notes		combinations
	kilometres per litre	km/l (km/L)			Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)			Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)			Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp					mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)			Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi					impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)			As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POPULATION DENSITY
	unit	unit- code			notes		combinations
	inhabitants per square kilometre	PD/km2			PD stands for population density, i.e. humans (inhabitants)		PD/km2 PD/sqmi
	per square kilometre	/km2			Used when the word 'inhabitants' would be inappropriate.		/km2 /sqmi
	inhabitants per hectare	PD/ha					PD/ha PD/acre
	per hectare	/ha					/ha /acre
	inhabitants per square mile	PD/sqmi			PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/km2
	per square mile	/sqmi			Used when the word 'inhabitants' would be inappropriate.		/sqmi /km2
	inhabitants per acre	PD/acre					PD/acre PD/ha
	per acre	/acre					/acre /ha
COST PER UNIT MASS
	unit	unit- code			notes		combinations
	dollars per pound	$/lb			"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg					(none)
	dollars per troy ounce	$/ozt			12 troy ounces in 1 troy pound		(none)

'per' units: kg/ha, miles per gallon

When using a slash (/), a unit like kg/ha is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.

• {{convert|1000|kg/ha}} → 1,000 كيلوغرامs per هكتار (890 رطل/acre)
• {{convert|350|/in2}} → 350 لكل بوصة مربعة (54/سم²)

Population density (inhabitants per square mile) can be converted using

• {{convert|10|PD/sqmi|PD/km2}} → 10 نسمة لكل ميل مربعs (3.9/كم²)

Vehicular fuel efficiency, commonly expressed in miles per gallon or litres per 100 km can also be converted

• {{convert|26|mpgUS|l/100km mpgimp}} → 26 ميلs per غالون أمريكي (9.0 ل/100 كـم; 31 mpg_‑imp)

Units of difference: Expressing a change or difference in temperature

We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:

• {{convert|10|C}} → 10 °م (50 °ف) (standard temperature conversion)
• {{convert|10|-|15|C}} → 10–15 °م (50–59 °ف) (standard temperature range conversion)

When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C, |F and |K), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change, |F-change and |K-change.

Compare the following two examples with the two above:

• {{convert|10|C-change}} → 10 °م (18 °ف) increase in temperature
• {{convert|10|-|15|C-change}} → 10–15 °م (18–27 °ف) warmer than normal

To produce multiple units in the output:

• {{convert|10|C-change|F-change K-change}} → 10 °م (18 °ف; 10 ك) difference

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert|1|yd|2|ft|3|in}} → 1 يارد 2 قدم 3 بوصة (1.60 م)
• {{convert|2|ft|3|in|cm}} → 2 قدم 3 بوصة (69 سـم)
• {{convert|1|lb|5|oz|g}} → 1 رطل 5 أونصةs (600 غ)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{convert|2|m|ftin}} → 2 مترs (6 قدم 7 بوصة)
• {{convert|2|m|ft in}} → 2 مترs (6.6 قدم; 79 بوصة), using a space, returns the decimal point

Default behavior, for comparison:

• {{convert|2|m}} → 2 مترs (6 قدم 7 بوصة)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|10|$/mi|$/km}} → $10 per ميل ($6.2/كـم)
• {{convert|1500|$/ozt|$/g}} → $1,500 per أوقية ترويسية ($48/غ)

You can set the currency in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} →

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km)

Using convert inside templates

For usage in template code, like infoboxes, {{Convert}} has these options:

Pre-formatting fraction input

• Module:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input.

Your template can accept |input=16 7/8 and use {{#invoke:Convert/helper|number|16 7/8}} →

Using a Wikidata property

• Adding the Wikidata property code, like code |input=P2073, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.

Note: to return that property value for an other article, use |qid=.

Example for مدى المركبة (P2073) of (Qخطأ لوا في وحدة:I18n على السطر 20: variable 'tableMerge' is not declared.):

• {{convert|input=P2073|qid={{get QID|Cessna 208 Caravan}}|ftin|abbr=on}} →
• {{convert|input=P2073|qid=Q1056131|km|abbr=on}} →
• {{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}} →

For example see قالب:Infobox Telescope.

Sometimes a property may have more than one value against it in Wikidata. You can use the |qual= parameter to specify which of the values you want to use.

Example for القطر (P2386): Note: this example uses |qid=Q1513315 (testing for مرصد القطب الجنوبي (Q1513315))

• مرآة رئيسة (Q613628): {{convert|input=P2386|qual=Q613628|ft|abbr=on}} →
• secondary mirror (Q1395645): {{convert|input=P2386|qual=Q1395645|ft|abbr=on}} →

Parameter list

Parameter options for {{convert}}
Parameter	Value	Description	Note
|abbr=in	in	Use symbol for first (left-hand side) unit	Unit display
|abbr=off	off	Use name for all units	Unit display
|abbr=none	none
|abbr=on	on	Use symbol for all units	Unit display
|abbr=out	out	Use symbol for right-hand side unit (default)	Unit display
|abbr=unit	unit	Use symbol for all units when using scientific notation	Unit display
|abbr=values	values	Omit both the input and output units: show only the numbers	Unit display
|abbr=~	~	Shows both unit name and symbol	Unit display
|adj=mid|…	mid	User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on	on	Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…	pre	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0	ri0	Round input with precision 0	Input precision
|adj=ri1	ri1	Round input with precision 1	Input precision
|adj=ri2	ri2	Round input with precision 2	Input precision
|adj=ri3	ri3	Round input with precision 3	Input precision
|comma=5	5	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=off	off	No thousands separator	Number format
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br/>"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|…[|…]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|…	x	Join input and output using user-specified text	Word adding
|frac=N	N	Show imperial number in fractions, denominator=N	Number format, fraction
|input=P2048	P2048 (e.g.)	Reads and converts Wikidata property	Inside template
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Inverts order of input, output measurements (conversion first)	Order
|order=out	out	Displays output units in the order entered, skipping input unit	Order
|qid=Q1056131	Q1056131 (e.g.)	Reads Wikidata property from Wikidata item	Inside template; testing
|qual=Q613628	Q613628 (e.g.)	Qualify Wikidata property
|round=5	5	Rounds calculation to the nearest multiple of 5	Output precision
|round=25	25	Rounds calculation to the nearest multiple of 25	Output precision
|round=each	each	In a range, each number is rounded by the default rounding	Output precision
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Output precision
|sortable=on	on	Adds invisible sort key	Table sort
|sp=us	us	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	€	Replace $-sign with a currency sign, for example in €/hectare	Cost per unit No currency conversion happens
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|disp=flip	flip	Deprecated. Use |order=flip	Order
|sing=		Deprecated. Use |adj=	Plurals

Deprecated options

This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• disp=flip is deprecated. Use order=flip instead
• sing= is deprecated in any situation. Use adj= instead
• Range separator |xx| is deprecated (not compliant). Use |x| instead
• Range separator |*| is deprecated (not compliant). Use |x| instead

TemplateData

This is the TemplateData for this template used by TemplateWizard, المحرر المتشاف and other tools. See a monthly parameter usage report for قالب:Convert in articles based on its TemplateData.

TemplateData for Convert

Converts measurements to other units.

وسائط القالب

هذا القالب يفضل التنسيق بنفس السطر للوسائط.

وسيط		وصف	نوع	حالة
Value	1	The value to convert.	رقم	مطلوب
From unit	2	The unit for the provided value. القيم المقترحة km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg مثال km	نص	مطلوب
To units	3	The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space. القيم المقترحة km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg مثال mi nmi	نص	مقترح
Precision or suffix	4	Significant digits after decimal dot or, if negative, exponent of ten.	رقم	اختياري
Link units	lk	Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. For more fine-grained control over which units to link, use the template multiple times. القيم المقترحة in out on off غيابي off مثال on	نص	اختياري
Abbreviation	abbr	Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units). القيم المقترحة in off none on out unit values ~ غيابي out مثال on, unit, in, out, off	نص	مقترح
Spelling	sp	Spelling of units. Use “us” to display unit names using U.S. spelling. مثال us	نص	اختياري
Adjective	adj	Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form. القيم المقترحة mid on pre ri0 ri1 ri2 ri3 off غيابي off مثال on	نص ويكي غير متوازن	اختياري
Conversion	disp	Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision. القيم المقترحة b sqbr br comma or number output number only out output only preunit table tablecen unit unit2 x مثال b	نص	اختياري
Ordering	order	“flip” returns converted value first, input value second. القيم المقترحة flip out مثال flip	نص	اختياري
Significant figures	sigfig	Indicates the number of significant figures to be used in rounding.	رقم	اختياري
Rounding output	round	The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range.	رقم	اختياري
Thousands separator	comma	Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345'). غيابي on مثال off	بولياني	اختياري
Sort key	sortable	“on” generates a hidden sort key مثال on	بولياني	اختياري
Spell numbers?	spell	If used, spells input or input and output numbers in words, optionally capitalizing the first القيم المقترحة in In on On مثال 'in', 'In', 'on', or 'On'	نص	اختياري
Singular?	sing	If 'yes', uses singular form of units (deprecated) مثال yes	بولياني	مستغنى عنه
Fraction?	frac	fraction as rounding unit	رقم	اختياري
Currency symbol	$	sets currency symbol in both units مثال $=€ will show " €10 per mile (€6.2/km)"	نص	اختياري
Mach altitude (ft)	altitude_ft	Mach (speed) depends on altitide القيم المقترحة 10000	رقم	اختياري
Mach altitude (m)	altitude_m	Mach (speed) depends on altitude	رقم	اختياري
WD property	input	Reads the property value of the item (article), then converts it مثال {{convert|input=P2046}} (P2046=area)	نص	اختياري

See also

• {{Cvt}}
• {{SI units}}
• {{Inflation}}, for converting historical prices to their current equivalent
• {{To USD}}, for currency conversions