قالب:Infobox dam
Usage تعديل
Use the following infobox for conventional, run-of-the-river, and tidal barrage types of hydroelectric power stations. For pumped-storage, tidal stream generator or dynamic tidal power types, please use Infobox Power Station.
{{{name}}} | |
---|---|
اسم رسمى | {{{official_name}}} |
البلد | {{{country}}} |
الاماكن حوالين السد | {{{locale}}} |
تحديد | 0°N 0°E / 0°N 0°E |
الحال | {{{status}}} |
بداية البنا | {{{construction_began}}} |
تاريخ الافتتاح | {{{open}}} |
تاريخ الهدم | {{{demolished}}} |
تكلفة البنا | {{{cost}}} |
الملاك | {{{owner}}} |
Dam and spillways | |
Type of dam | {{{type}}} |
Height | {{{height}}} |
Height (thalweg) | {{{height_thalweg}}} |
Height (foundation) | {{{height_foundation}}} |
Length | {{{length}}} |
Crest width | {{{crest_width}}} |
Base width | {{{base_width}}} |
Curve radius | {{{curve_radius}}} |
Volume | {{{volume}}} |
Crest elevation | {{{crest_elevation}}} |
Impounds | {{{crosses}}} |
Spillways | {{{spillways}}} |
Type of spillway | {{{spillway_type}}} |
Spillway capacity | {{{spillway_capacity}}} |
Reservoir | |
Creates | {{{reservoir}}} |
Capacity | {{{reservoir_capacity}}} |
Active capacity | {{{active_capacity}}} |
Inactive capacity | {{{inactive_capacity}}} |
Catchment area | {{{reservoir_catchment}}} |
Surface area | {{{reservoir_surface}}} |
Normal elevation | {{{reservoir_elevation}}} |
Max. water depth | {{{reservoir_max_depth}}} |
Reservoir length | {{{reservoir_length}}} |
Max. reservoir width | {{{reservoir_max_width}}} |
Power station | |
Owner(s) | {{{plant_owner}}} |
Operator(s) | {{{plant_operator}}} |
Commission date | {{{plant_commission}}} |
Licence expiration | {{{plant_licence_exp}}} |
Decommission date | {{{plant_decommission}}} |
Type | {{{plant_type}}} |
Hydraulic head | {{{hydraulic_head}}} |
Turbines | {{{turbines}}} |
Installed capacity | {{{installed_capacity}}} |
Maximum capacity | {{{max_planned_cap}}} |
Capacity factor | {{{capacity_factor}}} |
Annual generation | {{{average_annual_gen}}} |
Net generation | {{{net_generation}}} |
Website {{{website}}} | |
As of {{{as_of}}} | |
{{{extra}}} |
{{Infobox dam | name = | official_name = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_width = | location_map_text = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | coordinates_type = type:landmark | coordinates_display= inline,title | coordinates_ref = | country = | locale = | status = | construction_began = | open = | demolished = | cost = | owner = | type = | height = | height_thalweg = | height_foundation = | length = | crest_width = | base_width = | curve_radius = | volume = | crest_elevation = | crosses = | spillways = | spillway_type = | spillway_capacity = | reservoir = | reservoir_capacity = | active_capacity = | inactive_capacity = | reservoir_catchment= | reservoir_surface = | reservoir_elevation= | reservoir_max_depth= | reservoir_length = | reservoir_max_width= | hydraulic_head = | tidal_range = | plant_owner = | plant_operator = | plant_commission = | plant_licence_exp = | plant_decommission = | plant_type = | turbines = | installed_capacity = | max_planned_cap = | capacity_factor = | average_annual_gen = | net_generation = | website = | as_of = | extra = }}
Parameter names and descriptions تعديل
Parameter name | Description |
---|---|
name | Name of dam. |
official_name | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are allowed, although browsers such as IE are unable to play this type of file; avoid using. |
image_size | Avoid using: Overrides the default 250px |
image_caption | Caption beneath image |
image_alt | Alternative text for images. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_width | Avoid using: Overrides the default 250px |
location_map_text | Caption beneath the location map |
lat_d | Latitude degrees. |
lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
long_d | Longitude degrees. |
long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
coordinates_type | Optional parameter to add additional coordinate functions. See here for more details. |
coordinates_display | Display the coordinates inline or title, or both as inline,title. |
coordinates_ref | Use this field to add references to the coordinates. |
country | Country where the facility is located. |
locale | General area where located. Avoid being overly-detailed. |
status | State of the project. Enter any one of the following auto-expanding fields:
|
construction_began | Date construction began, consider using {{Start date}}. |
open | Date, or future date, of inauguration. Consider using {{Start date}}. |
demolished | Date of demolition (i.e removal or destruction of dam). Consider using {{End date}}. |
cost | Total cost of development |
owner | Owner(s) of the dam and/or power station. Consider limiting to the top two, and include ownership percentage. Example: |
type | Type of dam. Enter any one of the following auto-expanding fields:
|
length | Length of dam crown, w/ metric conversions |
height | Height if thalweg (riverbed) or foundation is not specified , w/ metric conversions |
height_thalweg | Height over thalweg (riverbed), w/ metric conversions |
height_foundation | Height over foundation bed, w/ metric conversions |
crest_width | Width at crest of dam, w/ metric conversions |
base_width | Width at base of dam, w/ metric conversions |
volume | Volume of material in the dam structure |
curve_radius | As applies with arch dams, w/ metric conversions |
crosses | Body of river or stream below dam |
crest_elevation | Height of the dam's crest above sea level, w/ metric conversions |
spillways | Number of spillways |
spillway_type | Type of spillway |
spillway_capacity | Capacity of spillway |
reservoir | Name of upstream body of water, if different than "crosses" |
reservoir_capacity | Capacity of reservoir, i.e. megalitres |
active_capacity | The active, live or useful capacity (storage) of the reservoir |
inactive_capacity | The inactive or dead capacity (storage) of the reservoir |
reservoir_catchment | Area of catchment for reservoir |
reservoir_surface | Surface area (top water level) of reservoir |
reservoir_elevation | The reservoir's height above sea level at normal levels, w/ metric conversions |
reservoir_max_depth | Maximum water depth of reservoir |
reservoir_length | Length of the reservoir at normal levels, w/ metric conversions |
reservoir_max_width | Maximum width of the reservoir at normal levels, w/ metric conversions |
hydraulic_head | Hydraulic head of the dam. |
tidal_range | Tidal range. Use this field for tidal barrages. |
plant_owner | Owner or owners of the hydroelectric power plant (if different than owner of the dam) |
plant_operator | Operator of the hydroelectric power plant (if different than owner) |
plant_commission | Power plant commissioning date. May be different than dam closing date |
plant_licence_exp | Date licence expires. |
plant_decommission | Power plant decommissioning date. May be different than dam opening date |
plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields:
|
turbines | Number of turbines, and make if known. See Water turbine |
installed_capacity | Installed generation capacity, measured in megawatts (MW). See Capacity |
max_planned_cap | Maximum planned capacity (if further construction/development is pending) in megawatts. |
capacity_factor | Capacity factor of the hydroelectric power station. |
average_annual_gen | Average annual power generation of the previous year. Measured in gigawatt-hours (GWh) |
net_generation | Net power generation since commissioning of the power station. Measured in gigawatt-hours (GWh) |
extras | free form, spans both columns, use sparingly |
website | Raw wikitext representing a website. Use [brackets] where appropriate |
Coordinates تعديل
The coordinates can be specified using one of three different methods
- lat_d, lat_m, lat_s, lat_NS, long_d, long_m, long_s, long_EW – For DMS style coordinates which can be used specify the pushpin in a {{Location map}}.
- lat_d and long_d – for decimal style coordinates which can be used to specify the pushpin in a {{Location map}}.
- coordinates – with a {{coord}} template which cannot be used with the
{{Location map}}
.
See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.
Microformat تعديل
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates تعديل
If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes تعديل
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision تعديل
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.